Leak Detection Dubai
Fast Water Leak Inspection & Repair. Professional leak detection in Dubai. We locate concealed pipe leaks, ceiling drips, bathroom seepage and slab moisture using precise inspection methods, then fix it properly.
Six Detection Methods. Every Leak Found.
Thermal Imaging Camera
Detects temperature variation behind walls, floors and ceilings to map hidden moisture without surface damage.
Acoustic Leak Detection
Listening equipment identifies leak sounds through walls, slabs and pipes.
Wall Scanner
Radar scanning locates pipe routes and voids behind finished surfaces.
Robotic Camera Inspection
Camera inserted into pipes confirms cracks and joint failures.
Dye Testing
Tracer dye traces leak paths and confirms source locations.
Pressure Testing
System pressurisation identifies pressure drops confirming active leaks.
Non-invasive. No unnecessary breaking of surfaces. Results confirmed before rectification.
Book a Leak InspectionTrusted by Dubai's property owners
Leak Inspections Completed
Concealed Pipe & Slab Leaks Located
First-Visit Detection Accuracy
Average Inspection Turnaround
Detection Methods: Hidden and Underground Leaks
When a leak leaves no visible sign, we locate it by sound, pressure, and thermal signature. No guesswork, no unnecessary breaking of surfaces.
Acoustic Leak Detection
High-sensitivity listening equipment picks up the sound of water escaping under pressure through walls, slabs, and concealed pipe networks. Acoustic detection locates underground and behind-wall leaks precisely, by sound, without excavation or breaking finished surfaces.
Pressure and Slab Leak Testing
Controlled pressurisation of isolated pipe runs identifies pressure drops that confirm active leaks within sealed and underground networks. Combined with acoustic detection and moisture mapping, this locates slab and underground pipe leaks without breaking the floor until the exact source is confirmed.
Camera Inspection and Dye Tracing
A flexible drainage camera visually confirms cracks, joint separation, and blockage points inside pipe networks. Tracer dye introduced at selected points confirms which drainage line is leaking and traces the exact water pathway to the affected area.
Swimming Pool Leak Detection Dubai
Pool leaks are rarely obvious. A pool losing 2 to 3 cm a day can look like evaporation until the DEWA bill rises or the deck begins to lift.
We use acoustic detection and pressure-drop testing to locate pool leaks without draining the pool or breaking the surrounding area. Once the source is confirmed you receive a written report signed by our engineer.
- Pool shell and interior surface
- Return and suction lines
- Skimmer boxes and fittings
- Underwater light fittings
- Equipment room connections
- Expansion joints and tile line
Most pool inspections complete within 2 to 3 hours across Dubai villas, hotels, and clubs.
WhatsApp for Pool Leak Inspection
What Clients Say After We Detect & Fix Their Leaks
Real feedback from villa and apartment owners across Dubai after professional leak detection and repair.
Inside a Fix It Mates Leak Investigation
Every inspection is captured on the record. Thermal imaging, dye tracing, and drainage camera evidence, verified and signed by our engineer.
Cool zones in blue and purple indicate moisture accumulation. Warm zones in orange and yellow indicate dry areas. Captured on live Dubai inspections.
Thermal Imaging Evidence
Cool zones reveal moisture accumulation behind floors and walls, invisible to the eye.
Dye Tracing Results
Coloured dye confirms which drainage line is leaking and traces the exact water pathway.
Drainage Camera Findings
Internal pipe inspection confirms cracks, joint separation, and defect locations.
Every finding documented, photographed, and signed by Engr. Ramis Manniyil.
Every Investigation Ends With a Signed Report
Every leak investigation concludes with a detailed report prepared and signed by Engr. Ramis Manniyil. Structured for insurance claims, developer handovers, and facility management records.
- Detection methodology applied
- Location-by-location findings
- Thermal and camera images embedded
- Leak source confirmation
- Rectification scope and cost indication
- Licensed engineer sign-off
Leak Detection Price Guide
Indicative starting prices. Final scope and cost are confirmed after the engineer site visit, based on area, access, and site condition.
Thermal Detection
Thermal imaging and moisture mapping to locate hidden moisture behind walls, floors, and ceilings.
Thermal + Wall Scanner
Thermal imaging combined with radar wall scanning to locate pipe routes, voids, and concealed anomalies.
Acoustic Testing
Acoustic detection for concealed, underground, and slab pipe leaks located by sound without excavation.
Combined Multi-Method Investigation
Full investigation using multiple methods together for complex or widespread leaks, with signed report.
Our Leak Detection & Inspection Process
On-Site Leak Assessment
Thermal & Moisture Testing
Source Tracing & Confirmation
Precise Repair & Restoration Plan
Where Is the Leak Coming From?
Select the area you’re facing issues — we’ll guide you to the right leak detection and repair approach.
Bathroom / Toilet
Leaks, dampness, or water seepage
Ceiling / Walls
Water stains, dripping, or bubbling paint
Kitchen / Utility
Leak under sink, behind cabinets, or wet floor
Swimming Pool
Swimming pool leaking water and levels going down
High DEWA Bill / Hidden Leak
Unexplained water usage or damp smell
Signs You May Have a Hidden Water Leak
If you notice any of these issues, your property may already have a waterproofing failure.
Ceiling Water Stains
Brown patches, damp ceilings, or peeling paint
Wall Dampness & Seepage
Moisture marks, bubbling paint, or salt deposits
Bathroom or Kitchen Leaks
Water appearing below tiles or on lower floors
Sudden High DEWA Bill
Unexpected increase in water consumption
AC Water Dripping
Water entering through balcony floors or edges
Musty Smell or Mold Growth
Persistent damp smell without visible water
Not sure where the leak is coming from? Book a Professional Leak Detection Inspection.
Book Leak InspectionWhy Choose Fix It Mates for Leak Detection in Dubai
A technical, inspection-led approach using advanced thermal imaging and non-destructive testing.
Inspection-First Approach
We identify the exact leak source before recommending any repair — no random breaking or trial-and-error fixes.
Advanced Thermal Leak Detection
We use professional thermal imaging cameras and moisture meters to detect concealed pipe and slab leaks without unnecessary damage.
Root-Cause Repair Recommendations
Once confirmed, we provide targeted repair solutions — pipe repair, joint resealing, or waterproofing correction.
Experienced Technical Team
Our leak detection specialists have hands-on experience across villas, apartments, and commercial properties in Dubai.
Clean & Controlled Work
Minimal wall opening. Precise access. Proper restoration after repair.
What Happens If You Delay Leak Detection?
Ignoring early signs of water leakage can lead to structural damage, health risks, and higher repair costs.
Structural Damage
Continuous hidden moisture weakens concrete, corrodes reinforcement, and expands cracks over time.
Mold & Indoor Air Issues
Undetected leaks create damp environments that promote mold growth and poor indoor air quality.
Electrical & Safety Hazards
Water near concealed wiring or DB panels increases the risk of short circuits and fire hazards.
Escalating Repair Costs
What starts as a minor pipe leak can turn into tile removal, ceiling replacement, and structural repair.
Early leak detection prevents major repair bills.
Book Leak Detection InspectionSuspect a Hidden Water Leak in Dubai?
Water Leak Detection in Dubai
FAQs
FAQs for Leak Detection
How do you detect a water leak without breaking walls?
Thermal imaging detects moisture behind walls and floors by temperature difference. Acoustic sensors locate pressurised pipe leaks by sound. Nothing is opened until the exact point is confirmed.
What is thermal imaging leak detection?
A thermal camera produces a heat map showing cooler or warmer zones caused by hidden moisture, revealing leaks behind plaster, screed, and concrete without surface damage.
What is acoustic leak detection?
High-sensitivity listening equipment detects the sound of water escaping under pressure through walls, slabs, and pipe networks, pinpointing concealed and underground leaks without excavation.
What detection methods do you use?
Thermal imaging, acoustic detection, wall scanning, robotic drainage camera inspection, dye tracing, and pressure testing. The method is selected on site based on the leak type and location.
Can you find a leak under a concrete floor or slab?
Yes. We combine acoustic detection, moisture mapping, and pressure testing to locate slab and underground pipe leaks without breaking the floor until the source is confirmed.
Can you detect an underground or concealed pipe leak?
Yes. Underground and concealed pipe leaks are located using acoustic detection and pressure testing, which identify the leak by sound and pressure drop rather than visible signs.
Can you find a leak coming through the ceiling?
Yes. Ceiling leaks are traced with thermal imaging and moisture metering to identify the source above, which is often a bathroom, pipe run, or AC line on the floor above.
Can you detect a leak in a wall?
Yes. Wall leaks are located with thermal imaging and moisture detection to find the moisture path without removing tiles or plaster until the source is confirmed.
Can you detect a bathroom leak?
Yes. Wall leaks are located with thermal imaging and moisture detection to find the moisture path without removing tiles or plaster until the source is confirmed.
Can you detect a swimming pool leak without draining the pool?
Yes. Acoustic detection and pressure-drop testing locate the leak while the pool stays full. No draining or excavation until the exact fault is confirmed.
How do I know if my pool is leaking or just evaporating?
Place a bucket of pool water on the first step, mark the level inside the bucket and on the pool wall, leave 24 hours with the pump off. If the pool loses noticeably more than the bucket, it is leaking.
What causes pool leaks in Dubai?
Failed pipe fittings and joints, cracked return lines from ground movement, worn skimmer gaskets, failed underwater light fittings, and hairline shell cracks. Dubai heat accelerates seal and joint failure.
How much does leak detection cost in Dubai?
The engineer site visit starts from AED 150 plus VAT. Detection starts from AED 1,500 plus VAT depending on area and method. Final scope and price are confirmed after the site visit.
How long does a leak detection inspection take?
Most residential inspections take 1 to 2 hours. Larger villas, commercial sites, and pools take 2 to 4 hours.
Do you provide a report after the inspection?
Yes. Every investigation ends with a detailed report signed by Engr. Ramis Manniyil, including methodology, findings, thermal and camera images, and a rectification proposal. Structured for insurance and developer handover.
Is the detection non-destructive?
Yes. All primary methods are non-invasive. No unnecessary breaking of surfaces. Any opening is done only once the leak source is confirmed.
What areas do you cover?
All of Dubai, including villas, apartments, hotels, commercial kitchens, and managed facilities.
Do you repair the leak as well as detect it?
Yes. Fix It Mates operates in-house MEP, civil, and waterproofing teams. We detect, rectify, and reinstate as one company, with no subcontractor coordination gaps.
Do you offer emergency leak detection?
Yes. Same-day response is available for active leaks causing ongoing damage. Contact us on WhatsApp for urgent inspections.
